Contact Information:
Qingdao Daxin Machinery Co Ltd
Email:sales@daxmachinery.com
Whatsapp:+86 15192782747
The guide rail lifting platform is a non-scissor hydraulic lifting mechanical equipment. It is used for the transfer of goods between the second and third floors of industrial plants, restaurants, and restaurants. The minimum height is 150-300mm, which is suitable for workplaces where pits cannot be excavated. And there is no need for the upper hanging point, the form is diversified (single column, double column, four column). The chain guide rail type lifting platform runs smoothly, the operation is simple and reliable, and the cargo transportation is economical and convenient.
The working principle of the guide rail lifting platform is hydraulic power, so it has a large carrying capacity and can realize layered control between floors. It uses side-mounted cylinders or double-sided cylinders. When lifting, the motor drives the gear pump to rotate and pump the oil into the cylinder. , The oil cylinder works upward under the pressure of hydraulic oil to drive the chain upward. The chain is fixed on the cargo table to make the cargo table rise; when it is lowered, under the action of the table’s own weight, the hydraulic oil of the cylinder is returned to the oil tank through the solenoid valve, so that the table falls steadily.
The guide rail lifting platform has low requirements for the installation environment and does not require deep excavation of the foundation. It can also be installed in a small space. There is no need for a machine room above the hoistway, which is convenient for maintenance, strong stability and space saving. Compared with elevators, freight elevators, etc., its cost is relatively low, which has become one of the important reasons why many customers like it.
Low failure rate of guide rail lifting platform: Thanks to the advanced hydraulic system and good control method, the failure rate of elevator operation can be minimized. Low power consumption: When the hydraulic elevator descends, it is driven by the pressure generated by its own weight, which greatly saves energy.
Only need to dig a pit of more than ten centimeters to ensure the convenience of goods in and out, and facilitate the installation and use of equipment.
Hydraulic cylinders, special heavy-duty chains, steel wire ropes, and multi-slave protection ensure the safety of equipment operation and use.
It is possible to directly use slope treatment without pit pit, which greatly facilitates the installation and use of space and occasions for the equipment.
Post time: Jul-20-2021