Self Propelled Scissor Lift China OEM Factory

Contact Information:

Qingdao Daxin Machinery Co Ltd

www.daxmachinery.com

Email:sales@daxmachinery.com

Whatsapp:+86 15192782747

▲ The fully self-propelled scissor aerial work platform makes many difficult and dangerous tasks easier, such as: indoor and outdoor cleaning (ceilings, curtain walls, glass windows, eaves, awnings, chimneys, etc.), billboard installation and maintenance , Installation and maintenance of street lights and traffic signs. The characteristics of this high-altitude lifting platform are small, flexible, convenient and fast. You can use a lifting platform instead of scaffolding to reach the height you need and solve your problems. At the same time, it can also save your expenses and precious time.

The fully self-propelled scissor aerial work platform has the following characteristics:

▲ High-altitude operation can walk with automatic walking function, can walk fast and slow under different working conditions, only one person can operate the machine to continuously complete lifting, forwarding, retreating, turning and other actions when working at height, which is more traditional The hydraulic platform greatly improves work efficiency, reduces the number of operators and labor intensity. It is especially suitable for large-scale continuous high-altitude operations such as airport terminals, stations, docks, shopping malls, stadiums, residential properties, factories and mines workshops.

▲ Security protection

A level alarm is installed on the machine. When the vehicle is tilted more than 3 degrees in all directions, the machine automatically enters the protection system. Only the machine is allowed to have a descending action. It can be used normally when it reaches a safe state. A safety board device is installed on the lower part of the bottom cart. As long as the platform is raised, the safety boards on both sides will be opened and in working condition to reduce the distance from the ground to avoid tipping accidents caused by uneven ground when walking at high altitude. An anti-explosion system for oil pipes is installed at the oil cylinder.

▲ Continuously variable speed

Only one person is required to operate, all actions are controlled by an operating handle on the workbench, and the motor is continuously variable. Effectively prolong the service life of the battery and the motor, and the motor only consumes energy during operation.

▲ Large angle steering system

The large-angle steering system is designed to make the machine have excellent flexibility.

▲ Disc brake system

The hydraulic disc brake system is adopted. When the machine is in a stopped state, the wheels are always in a braking state and can be reliably braked at a 6-degree slope.

▲ Smart charging system

The platform is equipped with a fully automatic charger, which can automatically complete the entire charging process. When the battery is fully charged, it will automatically stop charging.

▲ Extension platform

The platform can be removed, expanding the scope of work and meeting the special needs of some users.

▲ Overload protection

With overload protection function, it has compulsory protection for those who are not familiar with this equipment.

▲ Self-diagnosis function

With self-diagnosis function, customers can quickly grasp the working status of the equipment in time and better maintain the equipment.

▲ Green and environmental protection

Because the machine uses DC battery power, the machine can be safe and quiet for indoor or outdoor work.

▲ Emergency device

The machine is equipped with an emergency descent system.

Model No.

DX06

DX08

DX10

DX12

Lifting Height (mm)

6000

8000

10000

12000

Working Height(mm)

8000

10000

12000

14000

Lifting capacity

300

300

300

300

Folding maximum height-guardrail unfolding (mm)

2150

2275

2400

2525

Folding maximum height-guardrail removed (mm)

1190

1315

1440

1565

Overall Length (mm)

2400

Overall Width (mm)

1150

Platform Size (mm)

2270×1150

Platform extend size (mm)

900

Minimum ground clearance-folding (mm)

110

Minimum ground clearance-rising (mm)

20

Wheelbase (mm)

1850

 Minimum turn radius-inner wheel (mm)

0

Minimum turn radius-outer wheel (mm)

2100

Running speed-folding (km/h)

4

Running speed-rising (km/h)

0.8

Rising/falling speed (sec)

40/50

70/80

Battery (V/AH)

4×6/210

Charger (V/A)

24/25

Maximum climbing ability (%)

20

Maximum working allowable angle

2-3°

Way of control

Electro-hydraulic proportion control

Driver

Double front-wheel

Hydraulic drive

Double rear-wheel

Wheel size-stuffed&no mark

Φ381×127

Φ381×127

Φ381×127

Φ381×127

Whole weight (kg)

1900

2080

2490

2760

Photo Display:


Post time: Jan-23-2021

Send your message to us:

Write your message here and send it to us