Contact Information:

Qingdao Daxin Machinery Co Ltd

www.daxmachinery.com

Email:sales@daxmachinery.com

Whatsapp:+86 15192782747

Quality inspection of electric suction cups Published By Daxlifter

1. The incision height, if the incision height is inaccurate in practice, it needs to be calibrated;

2. Focus, check whether the focus is set correctly. If it is active focus, you must use the mobile phone APP to check whether the focus is correct;

3. Optical center. It is recommended to use a cutting nozzle with a diameter of 1.0 to view the optical center. The focus should be between -1 and 1 when viewing the optical center. The light spot is small and easy to investigate;

4. Cutting nozzle, check whether the type and size of the cutting nozzle are wrong, if it is correct, check whether the cutting nozzle is damaged and the roundness is normal;

5. Maintain the lens, check whether the maintenance lens is clean, and require no water, oil, and slag spots. Sometimes the maintenance lens will be fogged due to the weather or the air is too cold;

6. Correct the cutting parameters. After checking the above five items and there is no problem, then correct the parameters according to the phenomenon.

Electric suction cups generally encounter problems such as insufficient brightness of the thin plate section and rough section of the thick plate. If you want to cut the thick plate with good quality, you must first ensure the purity of the plate and gas, and then the selection of the cutting nozzle. The larger the aperture, the better the quality of the section, but the taper of the section will be greater.

Long-term storage of electric suction cups: If the electric suction cups are stored for a long time, in order to prevent the piston rod of the hydraulic cylinder from rusting, the operating equipment should be placed on the ground; the whole machine should be cleaned and stored in a boring indoor environment; the exposed surface of the piston rod of the hydraulic cylinder should be painted With a thin layer of butter, remove the negative terminal of the battery, or remove the battery and store it alone. Add an appropriate amount of antifreeze to the cooling water according to the lowest temperature; start the engine once a month and operate the machine to smooth the parts of the spring hanger and charge the battery together.

The electric suction cup walking oil pump is a two-way variable plunger pump, which drives the vibrating wheel and the two-way variable motor of the left and right wheels together. Turn the walking speed selection switch to select the driving speed range of the roller, and each speed range can be operated by the walking lever to complete stepless speed regulation. The walking lever is also the joystick of the forward and reverse reversing equipment. The electric suction cup can smoothly change the driving direction, and the operation is very simple.