1: Pay attention to maintenance, and regularly check the important parts of the hydraulic lift to ensure that no abnormal phenomenon occur to operation. This is related to the safety of operators, so it must be checked regularly. If there is an abnormality, there will be a safety hazard when working.

2: Hydraulic lifts should be operated by special personnel, and they must be skilled in the structural performance and use of the lifts before they can be operated independently. Master the correct operating procedures, do not operate arbitrarily. Read the manual carefully before use. Only by knowing the requirements in the operation process can the safety at work was ensured, which is also the key point that needs to be grasped at the application.

3: Operators must regularly inspect the platform’s machinery, electrical appliances, pump station parts and safety devices. After using for a long time, the core components need to be replaced, so as to ensure the stability and safety of the hydraulic lift during operation. Hydraulic oil should be kept clean and replaced regularly; when servicing and cleaning the lift, be sure to prop up the safety pole. When the lift is out of service, serviced or cleaned, the power must be turned off.

4: The mobile hydraulic lift should be used on the flat ground, and the people on the lift must be in a horizontal state; Keep the windbreak rope in mind when raising more than 10 meters when working outdoors; When working at heights is prohibited form windy weather; It is forbidden to overload or connect to unstable voltage, otherwise it will burn out the accessories box.

5: If the workbench does not move, stop work immediately and check. When it is found that the lifting platform makes an abnormal noise or the noise is too loud, it should be shut down immediately for inspection to avoid serious damage to the machinery.

Email: sales@daxmachinery.com