Contact Information:
Qingdao Daxin Machinery Co Ltd
www.daxmachinery.com
Email:sales@daxmachinery.com
Whatsapp:+86 15192782747

▲It can adapt to the specific operating environment of the shipyard, that is, it can work in humid, corrosive, dusty, high temperature and low temperature environments.
▲The operating platform can walk safely when the boom is in any position; the walking speed decreases with the increase of the lifting height.
▲Upper and lower consoles (ground console and platform console) are provided, and the upper and lower consoles are converted using reversing switches. The upper control is used to lock the lower console.
▲ The lower console indicates the diesel engine oil temperature, oil pressure, water temperature, etc.
▲Equipped with a device to prevent restarting when the engine is running.
▲ The boom stretches, luffs, and rotates smoothly, and has a buffer device.
▲Electronic hydraulic proportional control is adopted for boom expansion, luffing, rotation and platform walking, which can realize stepless speed regulation.
▲Reliable brakes should be provided for platform walking and boom rotation to ensure reliable control on slopes and during operation. Install the manual rotation lock and release the walking brake function so that the platform can be towed.
▲ When the platform is walking, if one round is empty, it can walk through the distribution valve and rely on another driving wheel alone.
▲ When the angle of the working arm is above the horizontal plane or the telescopic arm extends more than 1.2 meters, there is a limit to the traveling speed of the vehicle.
▲The boom telescopic, luffing, turning and platform walking can work at the same time.
▲ The working bucket has an automatic leveling function, and the inclination angle of the working bucket relative to the horizontal plane cannot be greater than 1.5°.
▲The upper and lower consoles are equipped with emergency stop buttons. When an unexpected operation occurs, the operator can quickly turn off the engine and prevent the platform from continuing to move.
▲Foot switch should be provided on the platform, and only the foot switch can be operated.
▲With auxiliary power device, when the engine or main oil pump fails, the working bucket can be safely lowered to the ground.
▲ The digital dual-sensor detection loop detects length, angle and other parameters in a timely manner, and dynamically reflects the working status of the boom. When one of the loops fails, the other loop can still complete the detection of all parameters.
▲The working bucket has a weighing function to accurately detect the load of the platform, regardless of the position of the load on the platform. It should have more than two load capacities, and different load capacities are allowed to have different operating ranges. When the platform load exceeds the maximum load capacity allowed under the corresponding amplitude state, it should be able to display and alarm and limit the action of the platform to ensure the strength of the working bucket and its connecting parts and the safety of work.
▲ With automatic speed change and alarm and cut-off functions: when the working range reaches or exceeds 80% of the corresponding allowable range, all action speeds will be automatically reduced and accompanied by buzzer and flashing alarms, and the closer the range is to the maximum limit, the higher the working speed. Low, the faster the buzzer sound. When the working range reaches 100% of the maximum allowable range, it will automatically stop all actions in the dangerous direction.
▲The engine throttle control should have three speeds. When there is no action for a long time, the engine will automatically drop to a low idle speed to meet the energy saving requirements.
▲ When the machine is parked on the ground where the unevenness exceeds 3°, the boom movement will be restricted.
▲ When the equipment is walking and rotating, it will give out an audible and visual alarm.
▲It adopts PLC and CAN bus control mode to simplify the circuit and facilitate maintenance and repair. The metal anti-air plug is adopted, and the protection level reaches IP65.
▲ The engine air intake system adopts a closed two-stage filter, which is suitable for operation in a dusty environment; and is convenient for maintenance.
▲The upper and lower consoles should be protected by protective covers.
▲ There are dust and sand prevention devices on the head of the boom and the piston rod of the oil cylinder.
▲ The hydraulic pump has automatic pressure compensation and load sensing functions to ensure that the oil pump and engine will not be damaged due to overload.
▲ There is an automatic shutdown device to prevent the engine from overheating and the hydraulic oil pressure is too low.
▲ Install a safety valve on the hydraulic circuit to prevent abnormal pressure rise in hydraulic components.
▲Each cylinder is equipped with a balance valve or hydraulic lock to ensure that the cylinder will not automatically move, and the connection between the cylinder and the balance valve and hydraulic lock is rigid.
▲ The hydraulic components and control components are imported brand products with high reliability.
▲ The towline mechanism adopts the patented sleeve technology. The sleeve is made of surface-treated aluminum alloy profiles. The towline is made of high-strength engineering plastics resistant to oceanic climates and adapts to harsh working environments.

▲There are hoisting ring positions on the bottom frame and turntable for easy hoisting.
▲The logo is clear and the meaning is clear.