New Arrival China High Altitude Operation Vehicle - Vertical Wheelchair Lift – Daxin
New Arrival China High Altitude Operation Vehicle - Vertical Wheelchair Lift – Daxin Detail:
|
Model Type |
VWL2510 |
VWL2515 |
VWL2520 |
VWL2525 |
VWL2530 |
VWL2535 |
VWL2540 |
VWL2550 |
VWL2560 |
|
Max. Platform Height |
1000mm |
1500mm |
2000mm |
2500mm |
3000mm |
3500mm |
4000mm |
5000mm |
6000mm |
|
Load Capacity |
250kg |
250kg |
250kg |
250kg |
250kg |
250kg |
250kg |
250kg |
250kg |
|
N.W/G.W(kg) |
350/450 |
450/550 |
550/700 |
700/850 |
780/900 |
850/1000 |
880/1050 |
1000/1200 |
1100/1300 |
|
Machine Size(mm) |
2000*1430*1300 |
2500*1430*1300 |
3000*1430*1000 |
3500*1430*1000 |
4000*1430*1000 |
4600*1430*1000 |
5100*1430*1000 |
6100*1430*1000 |
7100*1430*1000 |
|
Packing Size(mm) |
2200*1600*1600 |
2700*1600*1600 |
3200*1600*1600 |
3700*1600*1600 |
4200*1600*1600 |
4800*1600*1600 |
5300*1600*1600 |
6300*1600*1600 |
7300*1600*1600 |
|
Platform size |
1430*1000mm skid proof checkered steel |
||||||||
|
Min Platform height |
60mm |
||||||||
|
Speed |
0.06~0.1m/s |
||||||||
|
Control voltage |
24V/DC |
||||||||
|
Power Output |
1.1~2.2KW |
||||||||
|
Voltage |
As per your local Standard(single phase or three phase) |
||||||||
|
Drive System |
Hydraulic pump station and electric motor (See details below) |
||||||||
|
Control Mode |
Automatic travel switch(See details below) |
||||||||
|
Drive Control |
Self-resetting system |
||||||||
|
Overload |
Over current relay protection |
||||||||
|
Materials |
Aluminium rails and guard with spraying plastics. (See details below) |
||||||||
|
Working Condition |
Both indoors and outdoors -20°~70°C |
||||||||
|
Entrance-Exit Way |
It’s customized 90°or 180° |
||||||||
|
Installation |
No pit installing,easy to install and remove <3.0m,installed directly on the floor. >3.0m, installed both on the floor and on the wall. |
||||||||
|
Switches (See details below) |
|
||||||||
|
20’ Container Load |
2pcs |
2pcs |
1pc |
1pc |
1pc |
1pc |
1pc |
/ |
/ |
|
40’ Container Load |
4pcs |
4pcs |
3pcs |
3pcs |
2pcs |
2pcs |
2pcs |
1pc |
1pc |
Details
|
Switch 1: Control panel on platform |
Switch 2: Remote control |
|
|
|
|
Switch 3: Two column control: one is on ground floor; another can be fixed at any floor needed. |
Two Travel Switches.One plays an important role of slow down while approaching the ground. The other one cut off the power when reach the bottom. |
|
|
|
|
Whole aluminum rails. All refined aluminum parts are produced by mould,rather than rude welded iron. |
All bolts and screws are stainless steel,being used to assemble and fix each parts together |
|
|
|
|
Hydraulic Pump Station and Electric Motor |
Strengthening Ribs,to fix the cylinder and reinforce the whole structure |
|
|
|
|
Up converter：Rise slowly and keep steady during operation. |
The protection Chain. Helping up-down,keep balance and maintain steady,protecting the safety of a suddenly drop. |
|
|
|
|
Safety Sensor. During the falling,it will stop if there are object below. |
Safety Sensor. During the falling,it will stop if there are object below. |
|
|
|
|
Emergency Decline Bar |
Electric Magnetic Valve. Pull the “manual down”to go down through”Emergency Decline Bar” control the electric magnetic valve. |
|
|
|
|
Optional Ramp fixed on the ground,static |
Optional Automatic Ramp, up and down with the car automatically |
|
|
|
|
Japan Seal. It ensure the close fitting,more durable |
Slide Block: Nylon-antifraying,good noise reduction |
|
|
|
|
Fixed Structure,strong and durable enough |
Supporting Legs,keep balance |
|
|
|
|
Hydraulic Pump Station and Electric Motor |
Strengthening Ribs,to fix the cylinder and reinforce the whole structure |
Product detail pictures:
Related Product Guide:
Single man scissor lift type aerial work platform is a scissor lift suitable for single-person aerial work. Because of its small and flexible size, the size of the table is also relatively small, but it is worth noting that its table design is equipped with a small extension table, when the staff is working at a high altitude, they can easily pass the foot lock. The countertop is extended to expand the scope of high-altitude work, so that the staff can reduce the number of movements and make it more convenient and convenient to use. In order to better protect the safety of the work, the design of the platform is non-slip. Even if there is water on the platform or the soles of the workers are slippery, there is no need to worry about safety issues. Because the workers who use it may need to move the work position frequently, at this time, the automatic braking system of single man scissor lift has played a very good protective role. Once the operator releases the control handle, the device will stop moving immediately. There is no need to worry, because it has been tested and adjusted many times by technicians, which is very safe and convenient. After buying it back, it can be used directly without any additional test. New Arrival China High Altitude Operation Vehicle - Vertical Wheelchair Lift – Daxin , The product will supply to all over the world, such as: Swaziland, Guatemala, Bolivia,
By Cindy from South Korea - 2018.12.25 12:43
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Marina from Danish - 2018.11.02 11:11
