Manufacturer for Aerial Equipment - Vacuum Glass Lifter – Daxin

Short Description:


Technical Data

Product Tags

Related Video

Feedback (2)

CAR PARKING LIFT equipment is a three-dimensional parking equipment with very modern features and functions. Because with the increasing population of the world and the increasing number of domestic vehicles in some families, the demand for three-dimensional parking is also increasing. Decreasing land resources and increasing economic development are the main reasons for this trend. Without sufficient ground parking spaces, the idea of ​​vehicle parking can only be developed vertically. Therefore, the advent of the three-dimensional garage just solves this problem. In addition, the number of domestic vehicles in some families is increasing, and the parking space of your own home is limited, but if your vertical space is not affected, you can use the CAR PARKING LIFT device to increase the parking space, which is also extremely convenient. Although a small investment is required, an CAR PARKING LIFT unit can last for many years with normal maintenance. Our CAR PARKING LIFT equipment is divided into many kinds, two-column style, four-column style, superimposed style and so on. For companies or shopping malls with large demand for parking spaces, we can also provide vertical circulation CAR PARKING LIFT equipment or parking lot style. But usually for small repair shops and 4S shops, individual users only need to use simple two-post, four-post CAR PARKING LIFT equipment, which is simple, practical and inexpensive, and is the best choice for expanding the parking area. Portable Man Lift, Dock Leveler, 2 Post Lift,
Manufacturer for Aerial Equipment - Vacuum Glass Lifter – Daxin Detail:

Model Type

DXGL-LD-350

DXGL-LD-600

DXGL-LD-800

Load Capacity

350kg (retract)/175kg(extend)

600kg (retract)/300kg(extend)

800kg (retract)/400kg(extend)

Lifting Height

3650mm

3650mm

4500mm

QTY of Suction Cap

4pcs (standard)

6pcs (standard)

8pcs (standard)

Suction Cap Diameter

Ø300mm (standard)

Ø300mm (standard)

Ø300mm (standard)

Battery

2x12V/100AH

2x12V/120AH

2x12V/120AH

Battery Charger

Smart Charger

Smart Charger

Smart Charger

Controller

VST224-15

CP2207A-5102

VST224-1

Drive motor

24V/600W

24V/900W

24V/1200W

Hydraulic power

24V/2000W/5L

24V/2000W/5L

24V/2000W/12L

Front Wheel

High elastic solid rubber wheel

Ø310x100mm 2pcs

High elastic solid rubber wheel

Ø375x110mm 2pcs

High elastic solid rubber wheel

Ø300x125mm 2pcs

Driving Wheel

Ø250x80mm Middle horizontal drive wheel

Ø310x100mmMiddle horizontal drive wheel

Ø310x100mmMiddle horizontal drive wheel

N.W/G.W

780/820kg

1200/1250kg

Packing Size

Wooden carton: 3150x1100x1860mm. (1x20GP Loading Qty: 5sets)

Movement

Automatic

(4 kinds)

  1. Pad frame tilt front and backward 180°automatic
  2. Boom in/out 610/760mm automatic
  3. Powered arm up/down automatic
  4. Lateral side shift 100mm automatic

Manual (2kinds)

  1. Pad frame tilt left/right 90° manual (Pls look at Optional 1. automatic turn lift/right)
  2. Pad frame rotation 360°manual (Pls look at Optional 2. automatic rotation 360°)

Usages

Special design for handling difference kind of heavy plate, such as steel, glass, granite, marble and so forth, with different materials of vacuum suction caps.

Details

Drawing of 4pcs Suction Caps (DXGL-LD-350 Standard)

Drawing of 6pcs Suction Caps (DXGL-LD-600 Standard)

Adjustable Bracket: The bracket can be extended or retracted to fit for different size of heavy panel

360degree Manual Rotation: Rotating and indexing locking pin

Patented Suction Cap Assembly: strong and durable

Rubber Suction Caps: to lift up heavy panels whose surface is smooth,like glass,marbles etc.

Smart Driving Handle: forward/back knob,with belly switch and horn button.Easy to operate,very flexible.

Main Power Switch and Battery Indicator

Counter Weight: They keep balance the machine while loaded. 10pcs/15pcs.1pc is 20KG.

Strong Car Chassis: advanced rear axle drive and electromagnetic brakes.

Maintenance Free Battery: with battery meter. Long life span for more than 5years.

High Performance Pump Station and Oil Tank: with anti-explosion valve and over-flow valve for safety.

Smart Hydraulic Controls: lift/lower/shaft left/right/retract/extended/tilt up/down etc.

Smart Pneumatic Control: Power Switch and Buzzer

Vacuum Gauge: the buzzer will keep alarming if the pressure is not proper.
DC Power Dual Circuit Vacuum System with Check Valve: safe and security

Main Hydraulic Boom and Extending Inner Boom

Safety Precaution: in case of sudden fall and emergency decline needed

Side Shaft Actuator and Battery Charger inside the front cover

Electric Driving Wheel: rear axle drive and electromagnetic brake(250x80mm)

Outriggers On Both Side (PU)

Front Wheel (310x100mm)


Product detail pictures:

Manufacturer for Aerial Equipment - Vacuum Glass Lifter – Daxin detail pictures

Manufacturer for Aerial Equipment - Vacuum Glass Lifter – Daxin detail pictures

Manufacturer for Aerial Equipment - Vacuum Glass Lifter – Daxin detail pictures

Manufacturer for Aerial Equipment - Vacuum Glass Lifter – Daxin detail pictures

Manufacturer for Aerial Equipment - Vacuum Glass Lifter – Daxin detail pictures

Manufacturer for Aerial Equipment - Vacuum Glass Lifter – Daxin detail pictures


Related Product Guide:

STATIONARY SCISSOR LIFT equipment is designed to handle heavy loads. And we provide a variety of customized services to STATIONARY SCISSOR LIFT equipment. Because different customers have different needs. Such as table size, load, maximum table height and minimum table height. And some customers also have special needs for functions such as the control method of STATIONARY SCISSOR LIFT equipment. For example, the remote control is used to operate the equipment, or the fixed control station is used to operate the equipment. STATIONARY SCISSOR LIFT equipment has excellent characteristics such as simple structure and strong and durable materials. And our company's price for STATIONARY SCISSOR LIFT equipment is very low. Make STATIONARY SCISSOR LIFT equipment very competitive, even if your budget is very low, we can provide you with the right price. STATIONARY SCISSOR LIFT equipment has passed the test of the European Union, and we can provide CE certificate to obtain the approval of the European market. STATIONARY SCISSOR LIFT equipment is widely used in warehouse work, material handling work, port terminals and logistics markets. The STATIONARY SCISSOR LIFT equipment we provide has been widely praised in the European market and the North American market. It is not only solid and durable, but also has excellent working performance and has been unanimously recognized by our customers. Technical parameters such as voltage and current are convenient for us to customize according to the detailed requirements of customers, and provide customers with excellent solutions according to local voltage regulations. And in terms of color customization, we also provide a variety of color options. This allows customers to choose the color they want, and can also work with the style of the factory. Manufacturer for Aerial Equipment - Vacuum Glass Lifter – Daxin , The product will supply to all over the world, such as: Netherlands, Spain, Bhutan,
  • The factory workers have a good team spirit, so we received high quality products fast, in addition, the price is also appropriate, this is a very good and reliable Chinese manufacturers.
    5 Stars By Joseph from Barbados - 2018.05.15 10:52
    The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
    5 Stars By Deborah from Paraguay - 2018.06.18 19:26

    Send your message to us:

    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us