China Hot New Products Small Boom Lift - Self Propelled Telescopic Boom Lift – Daxin Manufacturer and Supplier

Hot New Products Small Boom Lift - Self Propelled Telescopic Boom Lift – Daxin

Short Description:

Technical Data

Product Tags

Feedback (2)

Single man scissor lift type aerial work platform is a scissor lift suitable for single-person aerial work. Because of its small and flexible size, the size of the table is also relatively small, but it is worth noting that its table design is equipped with a small extension table, when the staff is working at a high altitude, they can easily pass the foot lock. The countertop is extended to expand the scope of high-altitude work, so that the staff can reduce the number of movements and make it more convenient and convenient to use. In order to better protect the safety of the work, the design of the platform is non-slip. Even if there is water on the platform or the soles of the workers are slippery, there is no need to worry about safety issues. Because the workers who use it may need to move the work position frequently, at this time, the automatic braking system of single man scissor lift has played a very good protective role. Once the operator releases the control handle, the device will stop moving immediately. There is no need to worry, because it has been tested and adjusted many times by technicians, which is very safe and convenient. After buying it back, it can be used directly without any additional test. Articulating Lift, Electric Lifting Table, Articulated Lift,

Hot New Products Small Boom Lift - Self Propelled Telescopic Boom Lift – Daxin Detail:

Model Type	STBL-30.4	STBL-39.3	STBL-40.3
Work Height Maximum	32.4 m	41.3 m	42.3m
Platform Height Maximum	30.4m	39.3 m	40.3m
Horizontal reach maximum	21.4m	21.5 m	21.6m
Lift capacity(restricted)	480 kg	480 kg	360 kg
Lift capacity(non-restricted)	340 kg	340 kg	230 kg
Length( stowed) Ⓓ	13 m	13.65 m	11m
Width (axle retracted/extended) Ⓔ	2.5m / 3.43m	2.49 m	2.49m
Height(stowed) Ⓒ	3.08m	3.9 m	3.17m
Wheel base Ⓕ	3.66m	3.96 m	3.96 m
Ground clearance Ⓖ	0.43m	0.43 m	0.43 m
Platform measurement Ⓑ*Ⓐ	2.44*0.91m	0.91*0.76 m	2.44×0.91
Turning radius( inside,axle retracted)	4.14 m	3.13 m	4.13m
Turning radius (inside,axle extended)	2.74 m	3.13 m	3.13m
Turning radius( outside,axle retracted)	6.56 m	5.43 m	7.02m
Turning radius (outside,axle extended)	5.85 m	6.75 m	6.5m
Travel speed(stowed)	4.4 km/h
Travel speed(raised )	1.1km/h
Grade ability	40%
Solid tire	385/65D-24
Turntable swing	360° Continuous
Platform leveling	Automatic leveling
Platform rotation	±80°
Fuel tank capacity	150L
Drive & Steering mode	4x4x4
Engine	America Cummins B3.3 80 HP (60kw), Lovol 1004-4 78 hp (58kw),Perkins 400 76 hp (56kw)
Total weight	18500kg	20820kg	21000kh
Control voltage	12V DC Proportional	24V DC Proportional	24V DC Proportional

Product detail pictures:

Related Product Guide:

MOBILE ORDER PICKER equipment is a material handling equipment that is popular all over the world, and you can almost see him in any large warehouse. Shelves in warehouses are usually very high. If the MOBILE ORDER PICKER equipment is not used, the workers cannot reach the high-rise goods, so the MOBILE ORDER PICKER equipment is designed. Why is MOBILE ORDER PICKER equipment specially designed for warehouse cargo handling? First of all, the MOBILE ORDER PICKER equipment adopts a self-propelled control method, that is to say, workers can stand on the table and drive the MOBILE ORDER PICKER equipment to shuttle between the shelves like a vehicle. This control method greatly improves work efficiency. In the warehouse, the transmission ladder or scaffolding is still used as a solution to pick up the goods. This kind of work efficiency is very low. The use of MOBILE ORDER PICKER equipment can maximize the work efficiency. After a long calculation, it is very important to use the budget to buy MOBILE ORDER PICKER equipment. Cost-effective. In addition, MOBILE ORDER PICKER equipment also specially designed a workbench for placing goods. In this way, while taking the goods, it can provide space for the goods to be placed. without affecting the worker's standing position. And, the guardrail of MOBILE ORDER PICKER equipment is also carefully designed. The guardrails on both sides can be opened so that when workers face the shelves on the side, it is necessary to cross the guardrails to take the goods and it is dangerous. The battery, controller, pump station and other important components of the MOBILE ORDER PICKER equipment are all made of well-known brands, durable and have excellent working performance. The battery capacity can support a whole day of work after one full charge. If the frequency of use is not particularly high, it can be supported. Three to five working days. Peace of mind and convenience. Hot New Products Small Boom Lift - Self Propelled Telescopic Boom Lift – Daxin , The product will supply to all over the world, such as: Kenya, Oslo, Birmingham,

Aerial Boom Lift